We figured out that the boot stopped since the kernel couldn't start, after
using a proper kernel now boot proceeds till init stage but falls into an
infinite loop showing ..* [12.953154] binder: 110:110 transaction failed
29189, size 0-0. *
However seeing this line (highlighted below)*[ 10.357279] init: could not
import file '/init.unknown.rc' from '/init.rc': No such file or directory, * we
tried passing the androidboot.hardware argument from kernel commandline and
dtb, still it couldn't find the particular .rc file. What causes this
failure ? ..
LOG:
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.101 (***@Eleven) (gcc version 4.8.2
(4.8.2-14ubuntu1+6) ) #1 SMP PREEMPT Mon Feb 26 11:27:32 IST 2018
[ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7),
cr=30c7387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction
cache
[ 0.000000] Machine: jetson-tk1, model: NVIDIA Tegra124 PM375, serial: 0
[ 0.000000] Found vpr, start=0xf6900000 size=9700000
[ 0.000000] Found tsec, start=0xf4900000 size=2000000[ 0.000000]
Found tegra_fbmem: ***@ad012000
[ 0.000000] Tegra reserved memory:
[ 0.000000] LP0: f46ff000 - f46ff80f
[ 0.000000] Bootloader framebuffer: ad012000 - aef71fff
[ 0.000000] Bootloader framebuffer2: 00000000 - 00000000
[ 0.000000] Framebuffer: f2400000 - f35fffff
[ 0.000000] 2nd Framebuffer: f3600000 - f45fffff
[ 0.000000] Carveout: 00000000 - 00000000
[ 0.000000] Vpr: f6900000 - ffffffff
[ 0.000000] Tsec: f4900000 - f68fffff
[ 0.000000] cma: CMA: reserved 16 MiB at ac000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] DTS File Name:
arch/arm/boot/dts/tegra124-jetson_tk1-pm375-000-c00-00.dts
[ 0.000000] Tegra12: CPU Speedo value 2317, Soc Speedo value 2266, Gpu
Speedo value 2122
[ 0.000000] Tegra12: CPU Speedo ID 1, Soc Speedo ID 1, Gpu Speedo ID 1
[ 0.000000] Tegra12: CPU Process ID 1,Soc Process ID 1,Gpu Process ID 1
[ 0.000000] Tegra Revision: A01 SKU: 0x81 CPU Process: 1 Core Process: 1
[ 0.000000] tegra: PLLP fixed rate: 408000000
[ 0.000000] tegra_clk_shared_bus_user_init: c2bus client se left ON
[ 0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1092000000
[ 0.000000] Lowering sbus maximum rate from 420000000 to 384000000
[ 0.000000] Lowering vic03 maximum rate from 900000000 to 828000000
[ 0.000000] Lowering tsec maximum rate from 900000000 to 828000000
[ 0.000000] Lowering msenc maximum rate from 600000000 to 528000000
[ 0.000000] Lowering se maximum rate from 600000000 to 528000000
[ 0.000000] Lowering vde maximum rate from 600000000 to 528000000
[ 0.000000] Lowering host1x maximum rate from 500000000 to 444000000
[ 0.000000] Lowering vi maximum rate from 700000000 to 600000000
[ 0.000000] Lowering isp maximum rate from 700000000 to 600000000
[ 0.000000] Lowering c4bus maximum rate from 700000000 to 600000000
[ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000
[ 0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1066000000
[ 0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1066000000
[ 0.000000] Lowering hdmi maximum rate from 594000000 to 297000000
[ 0.000000] Lowering sdmmc1 maximum rate from 208000000 to 204000000
[ 0.000000] Lowering sdmmc3 maximum rate from 208000000 to 204000000
[ 0.000000] Lowering gbus maximum rate from 1032000000 to 852000000
[ 0.000000] Lowering cpu_g maximum rate from 3000000000 to 2320500000
[ 0.000000] tegra dvfs: VDD_CPU nominal 1260mV, scaling enabled
[ 0.000000] tegra dvfs: VDD_CORE nominal 1150mV, scaling enabled
[ 0.000000] tegra dvfs: VDD_GPU nominal 1200mV, scaling enabled
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] tegra_powergate_init: DONE
[ 0.000000] tegra12_plle_clk_enable: pll_e is already enabled
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1ec1000 s14720 r0 d13952
u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 465936
[ 0.000000] Kernel command line: init=init console=ttyS0,115200n8
lp0_vec=***@0xf46ff000 mem=***@2048M vpr=***@3945M tsec=***@3913M
core_edp_mv=1150 core_edp_ma=4000 tegraid=40.1.1.0.0 tegra_fbmem=0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Memory: 1826MB = 1826MB total
[ 0.000000] Memory: 1787448k/1787448k available, 119240k reserved,
1091584K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0cee748 (13210 kB)
[ 0.000000] .init : 0xc0cef000 - 0xc0d7e980 ( 575 kB)
[ 0.000000] .data : 0xc0d80000 - 0xc0ee34c8 (1422 kB)
[ 0.000000] .bss : 0xc0ee34c8 - 0xc0f841fc ( 644 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:960
[ 0.000000] the number of interrupt controllers found is 5
[ 0.000000] Architected local timer running at 12.00MHz (phys).
[ 0.000000] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every
2863311536128ns
[ 0.000000] Ignoring duplicate/late registration of read_current_timer
delay
[ 0.000413] Calibrating delay loop (skipped), value calculated using
timer frequency.. lpj=12000
[ 0.000429] pid_max: default: 32768 minimum: 301
[ 0.000630] Security Framework initialized
[ 0.000655] SELinux: Initializing.
[ 0.000814] Mount-cache hash table entries: 512
[ 0.021908] Initializing cgroup subsys debug
[ 0.021923] Initializing cgroup subsys freezer
[ 0.022010] CPU: Testing write buffer coherency: ok
[ 0.022048] ftrace: allocating 33748 entries in 66 pages
[ 0.065885] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.066085] Setting up static identity map for 0xc09815f0 - 0xc0981694
[ 0.066103] tegra_nct: not configured
[ 0.069869] ftrace: Allocated trace_printk buffers
[ 0.078495] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.081484] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.084521] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.084703] Brought up 4 CPUs
[ 0.084722] SMP: Total of 4 processors activated.
[ 0.084729] CPU: All CPU(s) started in SVC mode.
[ 0.092145] VFP support v0.3: implementor 41 architecture 4 part 30
variant f rev 0
[ 0.094484] pinctrl core: initialized pinctrl subsystem
[ 0.094838] regulator-dummy: no parameters
[ 0.095634] NET: Registered protocol family 16
[ 0.097944] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.099424] tegra_smmu tegra_smmu: Loaded Tegra IOMMU driver
[ 0.100437] console [pstore-1] enabled
[ 0.100470] ramoops: attached ***@0xf2200000, ecc: 0/0
[ 0.100768] cpuidle: using governor ladder
[ 0.100781] cpuidle: using governor menu
[ 0.103833] Timed out waiting for pll_a lock bit ([0xb0] = 0x4000010c)
[ 0.105454] ardbeg_camera_auxdata: update camera lookup table.
[ 0.106098] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name
default
[ 0.106188] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio
[ 0.126648] board_info: id:sku:fab:major:minor =
0x0177:0x0000:0x03:0x43:0x00
[ 0.126739] Selecting UARTD as the debug console
[ 0.126773] The debug console clock name is uartd
[ 0.127161] ardbeg_modem_init: modem_id = 0
[ 0.129786] Clear bootloader IO dpd settings
[ 0.130000] Loading jetson TK1 EMC tables.
[ 0.130236] tegra: pll_m is selected as scalable EMC clock source
[ 0.130267] Lowering emc maximum rate from 1200000000 to 792000000
[ 0.130283] tegra: validated EMC DFS table
[ 0.130399] laguna_edp_init: CPU regulator 15000 mA
[ 0.431954] laguna_edp_init: GPU regulator 8000 mA
[ 0.440838] swapper/0 isomgr_init(): iso emc max clk=792000KHz
[ 0.440851] swapper/0 isomgr_init(): max_iso_bw=6336000KB[ 0.441199]
ardbeg_touch_init init raydium touch
[ 0.441311] Raydium - touch platform_id : 8
[ 0.471671] platform tegradc.0: IOVA linear map
0x00000000f2400000(1200000)
[ 0.474536] platform tegradc.0: IOVA linear map
0x00000000f3600000(1000000)
[ 0.479786] platform tegradc.0: IOVA linear map
0x00000000ad012000(1f60000)
[ 0.482045] platform tegradc.0: IOVA linear map
0x00000000f6900000(9700000)
[ 0.483687] platform tegradc.1: IOVA linear map
0x00000000f2400000(1200000)
[ 0.486546] platform tegradc.1: IOVA linear map
0x00000000f3600000(1000000)
[ 0.491793] platform tegradc.1: IOVA linear map
0x00000000ad012000(1f60000)
[ 0.494051] platform tegradc.1: IOVA linear map
0x00000000f6900000(9700000)
[ 0.494571] tegra11_soctherem_oc_int_init(): OC interrupts are not
enabled
[ 0.494988] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4
watchpoint registers.
[ 0.495000] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.495317] mc-err: Started MC error interface!
[ 0.506239] bio: create slab <bio-0> at 0
[ 0.508173] reg-fixed-voltage 0.regulator: Consumer c1 does not have
device name
[ 0.508193] reg-fixed-voltage 0.regulator: Consumer c2 does not have
device name
[ 0.508315] vdd-ac-bat: 8400 mV
[ 0.508453] reg-fixed-voltage 1.regulator: Consumer c1 does not have
device name
[ 0.508471] reg-fixed-voltage 1.regulator: Consumer c2 does not have
device name
[ 0.508591] vdd-3v3-aon: 3300 mV
[ 0.508739] reg-fixed-voltage 8.regulator: Consumer c1 does not have
device name
[ 0.508757] reg-fixed-voltage 8.regulator: Consumer c2 does not have
device name
[ 0.508771] reg-fixed-voltage 8.regulator: Consumer c3 does not have
device name
[ 0.508793] reg-fixed-voltage 8.regulator: Consumer c6 does not have
device name
[ 0.508808] reg-fixed-voltage 8.regulator: Consumer c7 does not have
device name
[ 0.508823] reg-fixed-voltage 8.regulator: Consumer c8 does not have
device name
[ 0.508837] reg-fixed-voltage 8.regulator: Consumer c9 does not have
device name
[ 0.508851] reg-fixed-voltage 8.regulator: Consumer c10 does not have
device name
[ 0.508866] reg-fixed-voltage 8.regulator: Consumer c11 does not have
device name
[ 0.508881] reg-fixed-voltage 8.regulator: Consumer c12 does not have
device name
[ 0.508994] reg-3v3-supply: 3300 mV
[ 0.510514] vgaarb: loaded
[ 0.511118] SCSI subsystem initialized
[ 0.511477] usbcore: registered new interface driver usbfs
[ 0.511518] usbcore: registered new interface driver hub
[ 0.511627] usbcore: registered new device driver usb
[ 0.513967] as3722 4-0040: AS3722 ID: ID1:ID2:ID3 = 0x0c:0x01:0x15
[ 0.513983] as3722 4-0040: Final OTP version 1V21
[ 0.519165] gpiochip_add: registered GPIOs 1016 to 1023 on device:
as3722-gpio
[ 0.519349] as3722-regulator as3722-regulator.0: Consumer c1 does not
have device name
[ 0.519391] as3722-regulator as3722-regulator.0: Consumer c1 does not
have device name
[ 0.519426] as3722-regulator as3722-regulator.0: Consumer c1 does not
have device name
[ 0.519442] as3722-regulator as3722-regulator.0: Consumer c2 does not
have device name
[ 0.519457] as3722-regulator as3722-regulator.0: Consumer c3 does not
have device name
[ 0.519472] as3722-regulator as3722-regulator.0: Consumer c4 does not
have device name
[ 0.519512] as3722-regulator as3722-regulator.0: Consumer c1 does not
have device name
[ 0.519528] as3722-regulator as3722-regulator.0: Consumer c2 does not
have device name
[ 0.519542] as3722-regulator as3722-regulator.0: Consumer c3 does not
have device name
[ 0.519557] as3722-regulator as3722-regulator.0: Consumer c4 does not
have device name
[ 0.519571] as3722-regulator as3722-regulator.0: Consumer c5 does not
have device name
[ 0.519586] as3722-regulator as3722-regulator.0: Consumer c6 does not
have device name
[ 0.519600] as3722-regulator as3722-regulator.0: Consumer c7 does not
have device name
[ 0.519648] as3722-regulator as3722-regulator.0: Consumer c1 does not
have device name
[ 0.519663] as3722-regulator as3722-regulator.0: Consumer c2 does not
have device name
[ 0.519697] as3722-regulator as3722-regulator.0: Consumer c3 does not
have device name
[ 0.519713] as3722-regulator as3722-regulator.0: Consumer c4 does not
have device name
[ 0.519731] as3722-regulator as3722-regulator.0: Consumer c6 does not
have device name
[ 0.519748] as3722-regulator as3722-regulator.0: Consumer c8 does not
have device name
[ 0.519763] as3722-regulator as3722-regulator.0: Consumer c9 does not
have device name
[ 0.519777] as3722-regulator as3722-regulator.0: Consumer c10 does not
have device name
[ 0.519792] as3722-regulator as3722-regulator.0: Consumer c11 does not
have device name
[ 0.519807] as3722-regulator as3722-regulator.0: Consumer c12 does not
have device name
[ 0.519822] as3722-regulator as3722-regulator.0: Consumer c13 does not
have device name
[ 0.519836] as3722-regulator as3722-regulator.0: Consumer c14 does not
have device name
[ 0.519850] as3722-regulator as3722-regulator.0: Consumer c15 does not
have device name
[ 0.519888] as3722-regulator as3722-regulator.0: Consumer c1 does not
have device name
[ 0.519903] as3722-regulator as3722-regulator.0: Consumer c2 does not
have device name
[ 0.519944] as3722-regulator as3722-regulator.0: Consumer c1 does not
have device name
[ 0.519959] as3722-regulator as3722-regulator.0: Consumer c2 does not
have device name
[ 0.519974] as3722-regulator as3722-regulator.0: Consumer c3 does not
have device name
[ 0.519988] as3722-regulator as3722-regulator.0: Consumer c4 does not
have device name
[ 0.520003] as3722-regulator as3722-regulator.0: Consumer c5 does not
have device name
[ 0.520017] as3722-regulator as3722-regulator.0: Consumer c6 does not
have device name
[ 0.520032] as3722-regulator as3722-regulator.0: Consumer c7 does not
have device name
[ 0.520046] as3722-regulator as3722-regulator.0: Consumer c8 does not
have device name
[ 0.520061] as3722-regulator as3722-regulator.0: Consumer c9 does not
have device name
[ 0.520100] as3722-regulator as3722-regulator.0: Consumer c2 does not
have device name
[ 0.520115] as3722-regulator as3722-regulator.0: Consumer c3 does not
have device name
[ 0.520181] as3722-regulator as3722-regulator.0: Consumer c8 does not
have device name
[ 0.520196] as3722-regulator as3722-regulator.0: Consumer c9 does not
have device name
[ 0.520211] as3722-regulator as3722-regulator.0: Consumer c10 does not
have device name
[ 0.520245] as3722-regulator as3722-regulator.0: Consumer c1 does not
have device name
[ 0.520279] as3722-regulator as3722-regulator.0: Consumer c1 does not
have device name
[ 0.520294] as3722-regulator as3722-regulator.0: Consumer c2 does not
have device name
[ 0.520337] as3722-regulator as3722-regulator.0: Consumer c1 does not
have device name
[ 0.520377] as3722-regulator as3722-regulator.0: Consumer c2 does not
have device name
[ 0.520410] as3722-regulator as3722-regulator.0: Consumer c1 does not
have device name
[ 0.520425] as3722-regulator as3722-regulator.0: Consumer c2 does not
have device name
[ 0.520480] as3722-regulator as3722-regulator.0: Consumer c1 does not
have device name
[ 0.520495] as3722-regulator as3722-regulator.0: Consumer c2 does not
have device name
[ 0.520509] as3722-regulator as3722-regulator.0: Consumer c3 does not
have device name
[ 0.521409] vdd-cpu: 650 <--> 1300 mV at 1000 mV 3500 mA
[ 0.522160] vdd-core: applied init 1000000uV constraint
[ 0.522744] vdd-core: 700 <--> 1350 mV at 1000 mV 3500 mA
[ 0.523909] vddio-ddr: at 1350 mV
[ 0.524223] as3722-sd3: no parameters
[ 0.524798] avdd-pll-pex: 1050 mV
[ 0.525977] vdd-1v8: at 1800 mV
[ 0.526299] vdd-gpu: applied init 1000000uV constraint
[ 0.527162] vdd-gpu: 650 <--> 1200 mV at 1000 mV 3500 mA
[ 0.527654] avdd-pll: at 1050 mV at 300 mA
[ 0.528925] vdd-cam: 1800 mV at 150 mA
[ 0.529577] avdd-dsi-csi: at 1200 mV at 150 mA
[ 0.530775] vdd-rtc: 800 mV at 150 mA
[ 0.531253] avdd-cam: 2800 mV at 150 mA
[ 0.531739] vdd-1v2-cam: 1175 mV at 150 mA
[ 0.532114] vddio-sdmmc-2: 1800 <--> 3300 mV at 150 mA
[ 0.532603] vdd-1v1-cam: 1275 mV at 150 mA
[ 0.533542] avdd-spi: 3300 mV at 150 mA
[ 0.534025] vdd-2v7-cam: 2800 mV at 150 mA
[ 0.534515] vpp-fuse: 1800 mV at 150 mA
[ 0.535591] Linux video capture interface: v2.00
[ 0.536854] Advanced Linux Sound Architecture Driver Initialized.
[ 0.537284] Bluetooth: Core ver 2.16
[ 0.537333] NET: Registered protocol family 31
[ 0.537345] Bluetooth: HCI device and connection manager initialized
[ 0.537363] Bluetooth: HCI socket layer initialized
[ 0.537378] Bluetooth: L2CAP socket layer initialized
[ 0.537412] Bluetooth: SCO socket layer initialized
[ 0.537752] cfg80211: Calling CRDA to update world regulatory domain
[ 0.537959] nfc: nfc_init: NFC Core ver 0.1
[ 0.538025] NET: Registered protocol family 39
[ 0.538056] ardbeg_wifi_power: 1
[ 0.638846] usb0-vbus: 5000 mV
[ 0.639105] usb1-usb2-vbus: 5000 mV
[ 0.639368] vdd-hdmi: 5000 mV
[ 0.639630] avdd-hdmi-pll: 3300 mV
[ 0.639673] avdd-hdmi-pll: supplied by avdd-pll-pex
[ 0.639850] reg-fixed-sync-voltage 6.regulator: Consumer c1 does not
have device name
[ 0.639962] vdd-lcd-bl: 3300 mV
[ 0.640102] reg-fixed-sync-voltage 7.regulator: Consumer c1 does not
have device name
[ 0.640214] vdd-lcd-bl-en: 5000 mV
[ 0.640368] reg-fixed-sync-voltage 9.regulator: Consumer c3 does not
have device name
[ 0.640467] reg-5v0-supply: 5000 mV
[ 0.640658] reg-fixed-sync-voltage a.regulator: Consumer c1 does not
have device name
[ 0.640675] reg-fixed-sync-voltage a.regulator: Consumer c2 does not
have device name
[ 0.640690] reg-fixed-sync-voltage a.regulator: Consumer c3 does not
have device name
[ 0.640722] reg-fixed-sync-voltage a.regulator: Consumer c10 does not
have device name
[ 0.640737] reg-fixed-sync-voltage a.regulator: Consumer c11 does not
have device name
[ 0.640752] reg-fixed-sync-voltage a.regulator: Consumer c12 does not
have device name
[ 0.640767] reg-fixed-sync-voltage a.regulator: Consumer c13 does not
have device name
[ 0.640782] reg-fixed-sync-voltage a.regulator: Consumer c14 does not
have device name
[ 0.640796] reg-fixed-sync-voltage a.regulator: Consumer c15 does not
have device name
[ 0.640931] reg-1v8-supply: 1800 mV
[ 0.641225] reg-fixed-sync-voltage b.regulator: Consumer c1 does not
have device name
[ 0.641332] reg-dcdc-1v2: 1200 mV
[ 0.641495] reg-fixed-sync-voltage c.regulator: Consumer c7 does not
have device name
[ 0.641512] reg-fixed-sync-voltage c.regulator: Consumer c8 does not
have device name
[ 0.642068] as3722-gpio2-supply: 3300 mV
[ 0.642281] reg-fixed-sync-voltage d.regulator: Consumer c1 does not
have device name
[ 0.642791] as3722-gpio4-supply: 3300 mV
[ 0.643034] sdmmc-en-supply: 3300 mV
[ 0.643277] vdd-cdc-1v2-aud: 1200 mV
[ 0.643431] reg-fixed-sync-voltage 10.regulator: Consumer c1 does not
have device name
[ 0.643449] reg-fixed-sync-voltage 10.regulator: Consumer c2 does not
have device name
[ 0.643464] reg-fixed-sync-voltage 10.regulator: Consumer c3 does not
have device name
[ 0.643566] reg-aon-1v8: 1800 mV
[ 0.643742] reg-fixed-sync-voltage 11.regulator: Consumer c1 does not
have device name
[ 0.643844] reg-aon-1v2: 1200 mV
[ 0.646393] as3722-adc-extcon as3722-adc-extcon.2: USB-Host is
disconnected
[ 0.649849] tegra: started io power detection dynamic control
[ 0.649861] tegra: NO_IO_POWER setting 0x0
[ 0.649878] Switching to clocksource arch_sys_counter
[ 0.683041] nvmap_heap_init: nvmap_heap_init: created heap block cache
[ 0.683224] nvmap_page_pool_init: Total MB RAM: 1761
[ 0.683237] nvmap_page_pool_init: nvmap page pool size: 56352 pages (220
MB)
[ 0.683393] nvmap_background_zero_thread: PP zeroing thread starting.
[ 0.714160] nvmap_page_pool_init: highmem=25600,
pool_size=56352,totalram=450958, freeram=422275, totalhigh=272896,
freehigh=247288
[ 0.714355] iram: dma coherent mem declare 0x0000000040001000,258048
[ 0.715256] misc nvmap: created heap iram base 0x40001000 size (252KiB)
[ 0.715378] vpr: dma coherent mem declare 0x00000000f6900000,158334976
[ 0.718128] misc nvmap: created heap vpr base 0xf6900000 size (154624KiB)
[ 0.718355] nvmap:inner cache maint threshold=2097152
[ 0.719898] tegra-otg tegra-otg: otg transceiver registered
[ 0.720322] NET: Registered protocol family 2
[ 0.721361] TCP established hash table entries: 8192 (order: 4, 65536
bytes)
[ 0.721553] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.721739] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.721805] TCP: reno registered
[ 0.721824] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.721871] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.722270] NET: Registered protocol family 1
[ 0.722634] tegra-fuse tegra-fuse: Fuse driver initialized succesfully
[ 0.723332] Trying to unpack rootfs image as initramfs...
[ 0.817773] Freeing initrd memory: 1328K (c2100000 - c224c000)
[ 0.822942] host1x host1x: initialized
[ 0.824122] CPU PMU: probing PMU on CPU 2
[ 0.824151] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7
counters available
[ 0.824881] tegra_throttle : init passed
[ 0.824998] Tegra cpuquiet initialized: disabled
[ 0.825070] cpu-tegra: init EDP limit: 2320 MHz
[ 0.825876] thermal thermal_zone0: Registering thermal zone
thermal_zone0 for type CPU-therm
[ 0.826248] thermal thermal_zone1: Registering thermal zone
thermal_zone1 for type GPU-therm
[ 0.826460] thermal thermal_zone2: Registering thermal zone
thermal_zone2 for type MEM-therm
[ 0.826673] thermal thermal_zone3: Registering thermal zone
thermal_zone3 for type PLL-therm
[ 0.827378] Initialise system trusted keyring
[ 0.827435] audit: initializing netlink socket (disabled)
[ 0.827485] type=2000 audit(0.800:1): initialized
[ 0.828313] bounce pool size: 64 pages
[ 0.828747] VFS: Disk quotas dquot_6.5.2
[ 0.828975] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.829751] NTFS driver 2.1.30 [Flags: R/O].
[ 0.829873] fuse init (API version 7.22)
[ 0.832127] Key type asymmetric registered
[ 0.832141] Asymmetric key parser 'x509' registered
[ 0.832167] io scheduler noop registered (default)
[ 1.033253] PCIE: port 0: link down, retrying
[ 1.233317] PCIE: port 0: link down, retrying
[ 1.433380] PCIE: port 0: link down, retrying
[ 1.433391] PCIE: port 0: link down, ignoring
[ 1.438525] PCI host bridge to bus 0000:00
[ 1.438544] pci_bus 0000:00: root bus resource [mem
0x32100000-0x3fffffff]
[ 1.438560] pci_bus 0000:00: root bus resource [mem
0x12100000-0x320fffff pref]
[ 1.438574] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
[ 1.438588] pci_bus 0000:00: No busn resource found for root bus, will
use [bus 00-ff]
[ 1.438961] PCI: bus0: Fast back to back transfers disabled
[ 1.438978] pci 0000:00:00.0: bridge configuration invalid ([bus
00-00]), reconfiguring
[ 1.439547] PCI: bus1: Fast back to back transfers disabled
[ 1.439664] pci 0000:00:00.0: BAR 8: assigned [mem 0x32100000-0x321fffff]
[ 1.439681] pci 0000:00:00.0: BAR 9: assigned [mem 0x12100000-0x121fffff
64bit pref]
[ 1.439697] pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 1.439716] pci 0000:01:00.0: BAR 4: assigned [mem 0x12100000-0x12103fff
64bit pref]
[ 1.439745] pci 0000:01:00.0: BAR 2: assigned [mem 0x32100000-0x32100fff
64bit]
[ 1.439772] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[ 1.439791] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.439806] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff]
[ 1.439821] pci 0000:00:00.0: bridge window [mem 0x32100000-0x321fffff]
[ 1.439836] pci 0000:00:00.0: bridge window [mem 0x12100000-0x121fffff
64bit pref]
[ 1.439872] PCIE: No Link speed change happened
[ 1.439891] PCIE: ASPM not enabled
[ 1.440346] pwm-backlight pwm-backlight: unable to request PWM, trying
legacy API
[ 1.440453] sysedp_create_consumer: unable to create pwm-backlight, no
consumer_data for pwm-backlight found
[ 1.441256] tsec tsec: initialized
[ 1.442588] isp isp.0: initialized
[ 1.443421] isp isp.1: initialized
[ 1.444944] falcon vic03.0: initialized
[ 1.446050] falcon msenc: initialized
[ 1.446766] tegradc tegradc.0: DSI: HS clock rate is 464500
[ 1.448151] p,wuxga-10-1 panel dt support not available
[ 1.727524] tegradc tegradc.0: nominal-pclk:154700000 parent:154500000
div:1.0 pclk:154500000 153153000~168623000
[ 1.816099] tegradc tegradc.0: DSI pad calibration done
[ 1.823242] tegradc tegradc.0: probed
[ 1.823624] tegradc tegradc.0: fb registered
[ 1.823647] tegradc tegradc.0: nominal-pclk:154679000 parent:463500000
div:3.0 pclk:154500000 153132210~168600110
[ 1.824542] nvhdcp: using "always on" policy.
[ 1.825564] tegradc tegradc.1: probed
[ 1.825809] tegradc tegradc.1: fb registered
[ 1.830915] hdmi_state_machine_worker (tid ebbb37c0): state 7 (Takeover
from bootloader), hpd 0, pending_hpd_evt 1
[ 1.830948] hdmi_state_machine_set_state_l: switching from state 7
(Takeover from bootloader) to state 0 (Reset)
[ 1.834273] of_dma_controller_register: #dma-cells property is missing
or invalid
[ 1.834292] tegra-apbdma tegra-apbdma: Tegra20 APB DMA OF registration
failed -22
[ 1.836558] tegra-apbdma: probe of tegra-apbdma failed with error -22
[ 1.837156] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.838014] serial8250.0: ttyS0 at MMIO 0x70006300 (irq = 122) is a Tegra
[ 1.876986] hdmi_state_machine_worker (tid ebbb37c0): state 0 (Reset),
hpd 0, pending_hpd_evt 0
[ 1.876990] hdmi_disable_l: audio_switch 0
[ 1.876993] hdmi_disable_l: hpd_switch 0
[ 1.877001] hdmi_state_machine_set_state_l: switching from state 0
(Reset) to state 1 (Check Plug)
[ 1.888696] hdmi_state_machine_worker (tid ebbb37c0): state 1 (Check
Plug), hpd 0, pending_hpd_evt 0
[ 1.888700] hdmi_disable_l: audio_switch 0
[ 1.888702] hdmi_disable_l: hpd_switch 0
[ 1.888709] hdmi_state_machine_set_state_l: switching from state 1
(Check Plug) to state 3 (Disabled)
[ 4.207500] console [ttyS0] enabled
[ 4.211388] serial-tegra.0: ttyTHS0 at MMIO 0x70006000 (irq = 68) is a
SERIAL_TEGRA
[ 4.219238] serial-tegra.1: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a
SERIAL_TEGRA
[ 4.227116] serial-tegra.2: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a
SERIAL_TEGRA
[ 4.241779] brd: module loaded
[ 4.247185] loop: module loaded
[ 4.250440] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo
Giometti
[ 4.261551] nct1008_nct72 0-004c: nct1008_probe: initialized
[ 4.267767] thermal thermal_zone4: Registering thermal zone
thermal_zone4 for type Tboard_tegra
[ 4.277506] thermal thermal_zone5: Registering thermal zone
thermal_zone5 for type Tdiode_tegra
[ 4.288148] bluedroid_pm_probe: regulator avdd not available
[ 4.293838] bluedroid_pm_probe: regulator dvdd not available
[ 4.300424] tegra_profiler: Branch: Dev
[ 4.304334] tegra_profiler: Version: 1.81
[ 4.308414] tegra_profiler: Samples version: 30
[ 4.312970] tegra_profiler: IO version: 13
[ 4.317079] armv7_pmu: arch: Cortex A15, type: 4, ver: 0
[ 4.322397] tegra_profiler: PMU: amount of events: 10
[ 4.327459] tegra_profiler: PMU event: cpu-cycles
[ 4.332170] tegra_profiler: PMU event: instructions
[ 4.337052] tegra_profiler: PMU event: branch_instruction
[ 4.342454] tegra_profiler: PMU event: branch_misses
[ 4.347430] tegra_profiler: PMU event: bus-cycles
[ 4.352140] tegra_profiler: PMU event: l1_d_read
[ 4.356761] tegra_profiler: PMU event: l1_d_write
[ 4.361520] tegra_profiler: PMU event: l1_i
[ 4.365775] tegra_profiler: PMU event: l2_d_read
[ 4.370458] tegra_profiler: PMU event: l2_d_write
[ 4.375171] tegra_profiler: PL310 not found
[ 4.379388] tegra_profiler: power_clk: init
[ 4.383644] tegra_profiler: auth: init
[ 4.387636] GPS: mt3332_gps_mod_init: platform_driver_register ret = 0
[ 4.394993] of_dma_request_slave_channel: dma-names property missing or
empty
[ 4.402140] spi-tegra114 spi-tegra114.0: Dma channel is not available:
-19
[ 4.409117] of_dma_request_slave_channel: dma-names property missing or
empty
[ 4.416273] spi-tegra114 spi-tegra114.3: Dma channel is not available:
-19
[ 4.423668] tun: Universal TUN/TAP device driver, 1.6
[ 4.428741] tun: (C) 1999-2004 Max Krasnyansky <***@qualcomm.com>
[ 4.435034] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.442730] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xf000a000,
00:04:4b:70:89:73, XID 0c000800 IRQ 640
[ 4.452403] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes,
tx checksumming: ko]
[ 4.461008] PPP generic driver version 2.4.2
[ 4.465417] PPP BSD Compression module registered
[ 4.470132] PPP Deflate Compression module registered
[ 4.475198] PPP MPPE Compression module registered
[ 4.480004] NET: Registered protocol family 24
[ 4.484457] wlan: Loading MWLAN driver
[ 4.488343] wlan: Driver loaded successfully
[ 4.492655] usbcore: registered new interface driver r8152
[ 4.498184] usbcore: registered new interface driver asix
[ 4.503619] usbcore: registered new interface driver ax88179_178a
[ 4.509747] usbcore: registered new interface driver cdc_ether
[ 4.515621] usbcore: registered new interface driver smsc95xx
[ 4.521402] usbcore: registered new interface driver cdc_subset
[ 4.527383] usbcore: registered new interface driver cdc_ncm
[ 4.533079] usbcore: registered new interface driver bb_raw_ip_net
[ 5.588955] can't open usb: !g_usb_interface[0]
[ 5.593497] cannot open baseband usb net
[ 5.597430] usbcore: deregistering interface driver bb_raw_ip_net
[ 5.603569] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.610279] tegra USB phy - inst[1] platform info:
[ 5.615079] port_otg: no
[ 5.617622] has_hostpc: yes
[ 5.620423] phy_interface: USB_PHY_INTF_UTMI
[ 5.624699] op_mode: TEGRA_USB_OPMODE_HOST
[ 5.628803] qc2_voltage: 0
[ 5.631518] vbus_gpio: -1
[ 5.634147] hot_plug: disabled
[ 5.637208] remote_wakeup: enabled
[ 5.642084] tegra-ehci tegra-ehci.1: Tegra EHCI Host Controller
[ 5.648038] tegra-ehci tegra-ehci.1: new USB bus registered, assigned
bus number 1
[ 5.655711] tegra-ehci tegra-ehci.1: irq 53, io mem 0x7d004000
[ 5.666961] tegra-ehci tegra-ehci.1: USB 2.0 started, EHCI 1.10
[ 5.672977] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.679775] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.687003] usb usb1: Product: Tegra EHCI Host Controller
[ 5.692410] usb usb1: Manufacturer: Linux 3.10.101 ehci_hcd
[ 5.697990] usb usb1: SerialNumber: tegra-ehci.1
[ 5.703002] hub 1-0:1.0: USB hub found
[ 5.706776] hub 1-0:1.0: 1 port detected
[ 5.711046] tegra USB phy - inst[2] platform info:
[ 5.715848] port_otg: no
[ 5.718390] has_hostpc: yes
[ 5.721192] phy_interface: USB_PHY_INTF_UTMI
[ 5.725467] op_mode: TEGRA_USB_OPMODE_HOST
[ 5.729568] qc2_voltage: 0
[ 5.732312] vbus_gpio: -1
[ 5.735029] hot_plug: disabled
[ 5.738096] remote_wakeup: enabled
[ 5.742919] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
[ 5.748866] tegra-ehci tegra-ehci.2: new USB bus registered, assigned
bus number 2
[ 5.756525] tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000
[ 5.767961] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.10
[ 5.773975] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.780772] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 5.787999] usb usb2: Product: Tegra EHCI Host Controller
[ 5.793405] usb usb2: Manufacturer: Linux 3.10.101 ehci_hcd
[ 5.798984] usb usb2: SerialNumber: tegra-ehci.2
[ 5.803974] hub 2-0:1.0: USB hub found
[ 5.807747] hub 2-0:1.0: 1 port detected
[ 5.812124] ehci-pci: EHCI PCI platform driver
[ 5.816800] tegra_xusb_read_usb_calib: usb_calib0 = 0x0285038a
[ 5.822827] usbcore: registered new interface driver cdc_acm
[ 5.828495] cdc_acm: USB Abstract Control Model driver for USB modems
and ISDN adapters
[ 5.836534] usbcore: registered new interface driver cdc_wdm
[ 5.842253] usbcore: registered new interface driver usb-storage
[ 5.848369] usbcore: registered new interface driver usbserial
[ 5.854402] usbcore: registered new interface driver bb_usb_chr
[ 5.860362] usbcore: registered new interface driver option
[ 5.865970] usbserial: USB Serial support registered for GSM modem
(1-port)
[ 5.873032] usbcore: registered new interface driver pl2303
[ 5.878638] usbserial: USB Serial support registered for pl2303
[ 5.884605] usbcore: registered new interface driver modem_boot_hsic
[ 5.891005] usbcore: registered new interface driver nvshieldled
[ 5.897094] Nvidia Tegra High-Speed USB Device Controller driver (Apr
30, 2012)
[ 5.904572] tegra USB phy - inst[0] platform info:
[ 5.909373] port_otg: yes
[ 5.912047] has_hostpc: yes
[ 5.914855] phy_interface: USB_PHY_INTF_UTMI
[ 5.919132] op_mode: TEGRA_USB_OPMODE_DEVICE
[ 5.923408] qc2_voltage: 0
[ 5.926122] vbus_pmu_irq: 0
[ 5.928931] vbus_gpio: -1
[ 5.931559] charging: enabled
[ 5.934533] remote_wakeup: disabled
[ 5.943285] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered:
USB charging will not be enabled
[ 5.953335] usbcore: registered new interface driver xpad
[ 5.958780] usbcore: registered new interface driver usb_acecad
[ 5.964744] usbcore: registered new interface driver aiptek
[ 5.970356] usbcore: registered new interface driver gtco
[ 5.975791] usbcore: registered new interface driver hanwang
[ 5.981487] usbcore: registered new interface driver kbtab
[ 5.987015] usbcore: registered new interface driver wacom
[ 5.995368] as3722-rtc as3722-rtc.1: rtc core: registered as3722 as rtc0
[ 6.002088] as3722-rtc as3722-rtc.1: RTC interrupt 449
[ 6.009636] i2c /dev entries driver
[ 6.013608] virtual_init
[ 6.017818] nvavp nvavp: allocated IOVA at 8ff00000 for AVP os
[ 6.024256] tegra_dtv_probe: probing dtv.
[ 6.028343] setup_stream: bufsize = 4096, bufnum = 4
[ 6.033205] setup_dma:could not allocate DMA chn
[ 6.038018] tegra_dtv_probe: DTV probing failed
[ 6.042395] tegra_dtv: probe of dtv failed with error -12
[ 6.048012] ar0832_init: ++
[ 6.051131] i2c-core: driver [max77387] using legacy suspend method
[ 6.057406] i2c-core: driver [max77387] using legacy resume method
[ 6.063630] i2c-core: driver [as364x] using legacy suspend method
[ 6.069728] i2c-core: driver [as364x] using legacy resume method
[ 6.075864] [IMX135] sensor driver loading
[ 6.080008] [IMX179] sensor driver loading
[ 6.084152] [imx132] sensor driver loading
[ 6.088295] [ar0261] sensor driver loading
[ 6.092517] ov7695 sensor driver loading
[ 6.096487] mt9m114 sensor driver loading
[ 6.101078] usbcore: registered new interface driver uvcvideo
[ 6.103966] otg state changed: SUSPEND --> PERIPHERAL
[ 6.111868] USB Video Class driver (1.1.1)
[ 6.115972] gspca_main: v2.14.0 registered
[ 6.126878] ion_chunk_heap_create: base 2860515328 size 4194304 align
16384
[ 6.134109] ashmem: initialized
[ 6.138442] device-mapper: uevent: version 1.0.3
[ 6.143206] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised:
dm-***@redhat.com
[ 6.151804] BT: Loading driver
[ 6.155051] BT: Driver loaded successfully
[ 6.159628] sdhci: Secure Digital Host Controller Interface driver
[ 6.165819] sdhci: Copyright(c) Pierre Ossman
[ 6.170184] sdhci-pltfm: SDHCI platform and OF driver helper
[ 6.176201] sdhci-tegra sdhci-tegra.3: vddio_sd_slot regulator not
found: -517. Assuming vddio_sd_slot is not required.
[ 6.187132] sdhci-tegra sdhci-tegra.3: Speedo value 2266
[ 6.192459] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1150,
boot_mv 1150, min_or_mv 1100
[ 6.202149] mmc0: no vqmmc regulator found
[ 6.206277] mmc0: no vmmc regulator found
[ 6.210296] mmc0: Invalid maximum block size, assuming 512 bytes
[ 6.216327] sysedp_create_consumer: unable to create sdhci-tegra.3, no
consumer_data for sdhci-tegra.3 found
[ 6.249963] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3]
using ADMA
[ 6.258346] sdhci-tegra sdhci-tegra.2: Speedo value 2266
[ 6.263821] sdhci-tegra sdhci-tegra.2: Tuning constraints: nom_mv 1150,
boot_mv 1150, min_or_mv 1100
[ 6.273237] mmc1: no vqmmc regulator found
[ 6.278523] mmc1: no vmmc regulator found
[ 6.282553] mmc1: Invalid maximum block size, assuming 512 bytes
[ 6.288583] sysedp_create_consumer: unable to create sdhci-tegra.2, no
consumer_data for sdhci-tegra.2 found
[ 6.321966] mmc1: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2]
using ADMA
[ 6.323116] mmc0: BKOPS_EN bit is not set
[ 6.329131] sdhci-tegra sdhci-tegra.3: Found T2T coeffs data
[ 6.329138] sdhci-tegra sdhci-tegra.3: 200MHz tap hole coeffs found
[ 6.870250] **********Auto tuning windows*************
[ 6.872286] tegra-se tegra12-se: crypto_register_sha alg failed index[5]
[ 6.872349] ------------[ cut here ]------------
[ 6.872364] WARNING: at kernel/irq/manage.c:1244 __free_irq+0xb8/0x214()
[ 6.872367] Trying to free already-free IRQ 90
[ 6.872375] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.101 #1
[ 6.872401] [<c00163e4>] (unwind_backtrace+0x0/0x13c) from [<c0013130>]
(show_stack+0x18/0x1c)
[ 6.872417] [<c0013130>] (show_stack+0x18/0x1c) from [<c0067980>]
(warn_slowpath_common+0x58/0x70)
[ 6.872429] [<c0067980>] (warn_slowpath_common+0x58/0x70) from
[<c0067a04>] (warn_slowpath_fmt+0x38/0x48)
[ 6.872441] [<c0067a04>] (warn_slowpath_fmt+0x38/0x48) from [<c00e2bf0>]
(__free_irq+0xb8/0x214)
[ 6.872453] [<c00e2bf0>] (__free_irq+0xb8/0x214) from [<c00e3c6c>]
(free_irq+0x44/0x78)
[ 6.872467] [<c00e3c6c>] (free_irq+0x44/0x78) from [<c06e5140>]
(tegra_se_probe+0x1f0/0x9bc)
[ 6.872483] [<c06e5140>] (tegra_se_probe+0x1f0/0x9bc) from [<c0420624>]
(platform_drv_probe+0x20/0x24)
[ 6.872498] [<c0420624>] (platform_drv_probe+0x20/0x24) from
[<c041ed58>] (driver_probe_device+0x148/0x3ac)
[ 6.872510] [<c041ed58>] (driver_probe_device+0x148/0x3ac) from
[<c041f09c>] (__driver_attach+0x94/0x98)
[ 6.872522] [<c041f09c>] (__driver_attach+0x94/0x98) from [<c041d0e0>]
(bus_for_each_dev+0x68/0x9c)
[ 6.872534] [<c041d0e0>] (bus_for_each_dev+0x68/0x9c) from [<c041daf4>]
(bus_add_driver+0x1d0/0x274)
[ 6.872545] [<c041daf4>] (bus_add_driver+0x1d0/0x274) from [<c041fb34>]
(driver_register+0x80/0x148)
[ 6.872559] [<c041fb34>] (driver_register+0x80/0x148) from [<c0cefb98>]
(do_one_initcall+0xd8/0x194)
[ 6.872570] [<c0cefb98>] (do_one_initcall+0xd8/0x194) from [<c0cefd9c>]
(kernel_init_freeable+0x148/0x1e8)
[ 6.872583] [<c0cefd9c>] (kernel_init_freeable+0x148/0x1e8) from
[<c0969afc>] (kernel_init+0x14/0x160)
[ 6.872595] [<c0969afc>] (kernel_init+0x14/0x160) from [<c000f0a0>]
(ret_from_fork+0x14/0x20)
[ 6.872617] ---[ end trace 03aad82bf7f4e2ed ]---
[ 6.872632] tegra-se: probe of tegra12-se failed with error -22
[ 6.872894] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.874743] usbcore: registered new interface driver usbhid
[ 6.874745] usbhid: USB HID core driver
[ 6.875096] tegra-hier-ictlr tegra-hier-ictlr: probed
[ 7.078692] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
[ 7.084208] win[0]: 0(0) - 63(1)
[ 7.087460] win[1]: 69(0) - 133(1)
[ 7.090886] win[2]: 137(0) - 202(1)
[ 7.094394] win[3]: 209(0) - 255(1)
[ 7.097903] ***************************************
[ 7.102835] ********tuning windows after inserting holes*****
[ 7.108623] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
[ 7.114147] win[0]:-69(0) - -1(1)
[ 7.117483] win[1]:0(0) - 0(1)
[ 7.120555] win[2]:1(0) - 31(2)
[ 7.123714] win[3]:33(2) - 63(1)
[ 7.126964] win[4]:69(0) - 100(2)
[ 7.130294] win[5]:102(2) - 133(1)
[ 7.133709] win[6]:137(0) - 169(2)
[ 7.137126] win[7]:171(2) - 202(1)
[ 7.140544] win[8]:209(0) - 238(2)
[ 7.143981] win[9]:240(2) - 255(1)
[ 7.147418] ***********************************************
[ 7.153007] **********Tuning values*********
[ 7.157288] **estimated values**
[ 7.160531] T2T_Vmax 57, T2T_Vmin 79, 1'st_hole_Vmax 47, UI_Vmax 87
[ 7.166805] **Calculated values**
[ 7.170157] T2T_Vmax 72, 1'st_hole_Vmax 32, UI_Vmax 69
[ 7.175326] T2T_Vmin 72, 1'st_hole_Vmin 32, UI_Vmin 69
[ 7.178432] usbcore: registered new interface driver snd-usb-audio
[ 7.179046] MAX98090 driver built on Feb 26 2018 at 11:25:44
[ 7.183245] tegra_offload_platform probe successfull.
[ 7.183248] succefully registered offload ops
[ 7.201676] ***********************************
[ 7.206219] ***********final tuning windows**********
[ 7.211277] win[0]: -56 - -14
[ 7.214255] win[1]: 13 - -13
[ 7.217143] win[2]: 14 - 24
[ 7.219945] win[3]: 41 - 50
[ 7.222746] win[4]: 82 - 88
[ 7.225549] win[5]: 115 - 120
[ 7.228524] win[6]: 150 - 153
[ 7.231517] win[7]: 188 - 189
[ 7.234511] win[8]: 222 - 217
[ 7.237489] win[9]: 255 - 242
[ 7.240463] ********************************
[ 7.244740] best tap win - (14-24), best tap value 19
[ 7.249803] sdhci-tegra sdhci-tegra.3: sdhci_tegra_verify_best_tap:
tuning freq 200000000hz, best tap 19
[ 7.261769] mmc0: new HS200 MMC card at address 0001
[ 7.266982] mmcblk mmc0:0001: Card claimed for testing.
[ 7.272414] mmcblk0: mmc0:0001 SEM16G 14.6 GiB
[ 7.277117] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB
[ 7.284763] Primary GPT is invalid, using alternate GPT.
[ 7.290137] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15
[ 7.445540] tegra30_avp_audio_platform_probe successful.
[ 7.445540] rt5639 0-001c: read 0xfd=0x6
[ 7.459000] sdhci-tegra sdhci-tegra.2: Found T2T coeffs data
[ 7.464677] sdhci-tegra sdhci-tegra.2: 200MHz tap hole coeffs found
[ 8.068300] **********Auto tuning windows*************
[ 8.073459] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
[ 8.078962] win[0]: 8(0) - 65(1)
[ 8.082236] win[1]: 76(0) - 134(1)
[ 8.085659] win[2]: 144(0) - 201(1)
[ 8.089165] win[3]: 214(0) - 255(1)
[ 8.092668] ***************************************
[ 8.097563] ********tuning windows after inserting holes*****
[ 8.103321] WIN_ATTR legend: 0-BOUN_ST, 1-BOUN_END, 2-HOLE
[ 8.108821] win[0]:8(0) - 65(1)
[ 8.111980] win[1]:76(0) - 134(1)
[ 8.115314] win[2]:144(0) - 201(1)
[ 8.118732] win[3]:214(0) - 255(1)
[ 8.122149] ***********************************************
[ 8.127735] **********Tuning values*********
[ 8.132021] **estimated values**
[ 8.135267] T2T_Vmax 58, T2T_Vmin 81, 1'st_hole_Vmax 8, UI_Vmax 86
[ 8.141457] **Calculated values**
[ 8.144790] T2T_Vmax 73, 1'st_hole_Vmax 1, UI_Vmax 68
[ 8.149855] T2T_Vmin 73, 1'st_hole_Vmin 1, UI_Vmin 68
[ 8.154930] ***********************************
[ 8.159476] ***********final tuning windows**********
[ 8.164542] win[0]: 21 - 52
[ 8.167354] win[1]: 89 - 121
[ 8.170253] win[2]: 157 - 188
[ 8.173238] win[3]: 227 - 242
[ 8.176213] ********************************
[ 8.178326] rt5639 0-001c: ASoC: mux INR Mux has no paths
[ 8.178343] rt5639 0-001c: ASoC: mux INL Mux has no paths
[ 8.191269] best tap win - (89-121), best tap value 105
[ 8.196516] sdhci-tegra sdhci-tegra.2: sdhci_tegra_verify_best_tap:
tuning freq 200000000hz, best tap 105
[ 8.208148] mmc1: new ultra high speed SDR104 SDHC card at address 0001
[ 8.214972] mmcblk mmc1:0001: Card claimed for testing.
[ 8.220360] mmcblk1: mmc1:0001 00000 29.8 GiB
[ 8.227055] mmcblk1: p1
[ 9.208080] rt5639 0-001c: rt5639_headset_detect RT5639_PWR_ANLG1(0x63)
= 0xa814
[ 9.215726] rt5639 0-001c: rt5639_headset_detect RT5639_IRQ_CTRL2(0xbe)
= 0x0
[ 9.284656] rt5639 0-001c: rt5639_headset_detect jack_type = 2
[ 9.290836] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <->
tegra30-i2s.1 mapping ok
[ 9.299129] tegra-udc tegra-udc.0: connected to non-standard charger
[ 9.305914] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <->
tegra30-spdif mapping ok
[ 9.314436] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <->
tegra30-i2s.3 mapping ok
[ 9.323170] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <->
dit-hifi mapping ok
[ 9.331712] tegra-snd-rt5639 tegra-snd-rt5639.0: dit-hifi <-> dit-hifi
mapping ok
[ 9.339973] tegra-snd-rt5639 tegra-snd-rt5639.0: snd-soc-dummy-dai <->
tegra-offload-pcm mapping ok
[ 9.349643] compress asoc: snd-soc-dummy-dai <-> tegra-offload-compr
mapping ok
[ 9.357479] tegra-snd-rt5639 tegra-snd-rt5639.0: rt5639-aif1 <->
tegra30-i2s.1 mapping ok
[ 9.368151] input: tegra-rt5639 Headphone Jack as
/devices/platform/tegra-snd-rt5639.0/sound/card1/input0
[ 9.378552] sysedp_create_consumer: unable to create speaker, no
consumer_data for speaker found
[ 9.387899] oprofile: using timer interrupt.
[ 9.392461] GACT probability NOT on
[ 9.395969] Mirror/redirect action on
[ 9.399641] u32 classifier
[ 9.402357] Actions configured
[ 9.405768] Netfilter messages via NETLINK v0.30.
[ 9.410529] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 9.416981] ctnetlink v0.93: registering with nfnetlink.
[ 9.422375] NF_TPROXY: Transparent proxy support initialized, version
4.1.0
[ 9.429343] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 9.435460] xt_time: kernel timezone is -0000
[ 9.440139] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.445629] arp_tables: (C) 2002 David S. Miller
[ 9.450294] TCP: cubic registered
[ 9.453621] Initializing XFRM netlink socket
[ 9.458088] NET: Registered protocol family 10
[ 9.463460] mip6: Mobile IPv6
[ 9.466474] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.472034] sit: IPv6 over IPv4 tunneling driver
[ 9.477586] NET: Registered protocol family 17
[ 9.482065] NET: Registered protocol family 15
[ 9.486521] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 9.492454] Bluetooth: HIDP socket layer initialized
[ 9.497567] NET: Registered protocol family 37
[ 9.530980] Registering SWP/SWPB emulation handler
[ 9.535790] last reset is due to power on reset
[ 9.535790]
[ 9.549301] Disabling clocks left on by bootloader:
[ 9.554170] audio_2x
[ 9.556636] audio
[ 9.558833] audio4
[ 9.561116] audio3
[ 9.563399] audio2
[ 9.565682] audio1
[ 9.567965] audio0
[ 9.570339] entropy
[ 9.572718] dsi2-fixed
[ 9.575347] dsi1-fixed
[ 9.577994] nor
[ 9.580020] trace
[ 9.582224] sdmmc4_ddr
[ 9.584856] sdmmc3_ddr
[ 9.587526] cclk_lp
[ 9.589901] pll_x_out0
[ 9.592541] pll_m_out1
[ 9.595316] tegra_dvfs: vdd_cpu connected to regulator
[ 9.600524] tegra_dvfs: vdd_core connected to regulator
[ 9.605810] tegra_dvfs: vdd_gpu connected to regulator
[ 9.611963] tegra_dvfs: registered vdd_cpu simon notifier
[ 9.617557] Tegra CPU DFLL is initialized with use_dfll = 1
[ 9.623236] CPU rate: 696 MHz
[ 9.623981] cpu_cold cooling device is registered
[ 9.896386] tegra_nct: not initialized
[ 9.900698] tegra dvfs: tegra sysfs cap interface is initialized
[ 9.906805] tegra dvfs: tegra sysfs gpu & emc interface is initialized
[ 9.913340] tegra dvfs: registered vdd_gpu simon notifier
[ 9.919342] tegra_actmon.emc: Completed initialization (0)
[ 9.925212] tegra_actmon.avp: Completed initialization (0)
[ 9.930860] tegra_mon.cpu_emc: Completed initialization (0)
[ 9.937754] Loading compiled-in X.509 certificates
[ 9.942575] registered taskstats version 1
[ 9.947669] vi vi.0: vi_probe: ++
[ 9.951754] vi vi.0: initialized
[ 9.955312] vi vi.1: vi_probe: ++
[ 9.959373] vi vi.1: initialized
[ 9.962753] reg-aon-1v2: incomplete constraints, leaving on
[ 9.968387] reg-aon-1v8: incomplete constraints, leaving on
[ 9.973972] reg-dcdc-1v2: incomplete constraints, leaving on
[ 9.979683] reg-5v0-supply: incomplete constraints, leaving on
[ 9.985535] avdd-hdmi-pll: incomplete constraints, leaving on
[ 9.991290] usb0-vbus: incomplete constraints, leaving on
[ 9.996699] vpp-fuse: incomplete constraints, leaving on
[ 10.002018] vdd-2v7-cam: incomplete constraints, leaving on
[ 10.007596] avdd-spi: incomplete constraints, leaving on
[ 10.012912] vdd-1v1-cam: incomplete constraints, leaving on
[ 10.018491] vdd-1v2-cam: incomplete constraints, leaving on
[ 10.024069] avdd-cam: incomplete constraints, leaving on
[ 10.029389] vdd-cam: incomplete constraints, leaving on
[ 10.034621] as3722-sd3: incomplete constraints, leaving on
[ 10.040113] vdd-3v3-aon: incomplete constraints, leaving on
[ 10.045696] vdd-ac-bat: incomplete constraints, leaving on
[ 10.051187] regulator-dummy: incomplete constraints, leaving on
[ 10.057876] file system registered
[ 10.062047] android_usb gadget: Mass Storage Function, version:
2009/09/11
[ 10.068939] android_usb gadget: Number of LUNs=1
[ 10.073567] lun0: LUN: removable file: (no medium)
[ 10.078806] android_maxim14675_set_voltage: max_voltage (vbus) = 5000
[ 10.085271] android_usb gadget: android_usb ready
[ 10.089984] tegra-udc: bind to driver android_usb
[ 10.095116] input: gpio-keys.3 as
/devices/platform/gpio-keys.3/input/input1
[ 10.102853] as3722-rtc as3722-rtc.1: setting system clock to 2000-01-01
00:00:44 UTC (946684844)
[ 10.112179] ALSA device list:
[ 10.115166] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
[ 10.120531] #1: tegra-rt5639
[ 10.124193] Freeing unused kernel memory: 572K (c0cef000 - c0d7e000)
[ 10.132797] init: init first stage started!
[ 10.213769] type=1403 audit(946684844.609:2): policy loaded
auid=4294967295 ses=4294967295
[ 10.222769] type=1404 audit(946684844.618:3): enforcing=1
old_enforcing=0 auid=4294967295 ses=4294967295
[ 10.237183] init: (Initializing SELinux enforcing took 0.10s.)
[ 10.247776] init: init second stage started!
[ 10.260550] init: Running restorecon...
[ 10.329977] init: waitpid failed: No child processes
[ 10.335564] init: (Loading properties from /default.prop took 0.00s.)
[ 10.345881] init: (Parsing /init.environ.rc took 0.00s.)
[ 10.352174] init: (Parsing /init.usb.rc took 0.00s.)
*[ 10.357279] init: could not import file '/init.unknown.rc' from
'/init.rc': No such file or directory *
[ 10.368036] init: (Parsing /init.usb.configfs.rc took 0.00s.)
[ 10.373995] init: (Parsing /init.zygote32.rc took 0.00s.)
[ 10.379494] init: (Parsing /init.rc took 0.04s.)
[ 10.384852] init: Starting service 'ueventd'...
[ 10.390085] init: Waiting for /dev/.coldboot_done...
[ 10.393460] ueventd: ueventd started!
[ 10.715278] ueventd: Coldboot took 0.32s.
[ 10.721881] init: Waiting for /dev/.coldboot_done took 0.33s.
[ 10.727732] init: /dev/hw_random not found
[ 10.740048] type=1400 audit(946684845.136:4): avc: denied { create }
for pid=1 comm="init" name="sdcard" scontext=u:r:init:s0
tcontext=u:object_r:tmpfs:s0 tclass=lnk_file permissive=0
[ 10.757639] init: write_file: Unable to open
'/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
[ 10.775291] init: write_file: Unable to open '/proc/sys/abi/swp': No
such file or directory
[ 10.783957] init: /dev/hw_random not found
[ 10.788354] init: do_start: Service logd not found
[ 10.793755] init: SELinux: Could not set context for /cache: Read-only
file system
[ 10.803297] init: (Loading properties from /system/build.prop took
0.00s.)
[ 10.810309] init: (Loading properties from /vendor/build.prop took
0.00s.)
[ 10.817248] init: (Loading properties from /factory/factory.prop took
0.00s.)
[ 10.824477] fs_mgr: Cannot open file /fstab.unknown
[ 10.829429] init: unable to read fstab /fstab.unknown: No such file or
directory
[ 10.837106] init: SELinux: Could not set context for /data: Read-only
file system
[ 10.844714] init: do_start: Service debuggerd not found
[ 10.849993] init: do_start: Service debuggerd64 not found
[ 10.855431] init: do_start: Service vold not found
[ 10.860664] init: Not bootcharting.
[ 10.887055] init: SELinux: Could not set context for /data: Read-only
file system
[ 10.894780] init: cannot find '/system/bin/tzdatacheck' (No such file or
directory), disabling 'exec 1 (/system/bin/tzdatacheck)'
[ 10.907727] init: (Loading properties from /data/local.prop took 0.00s.)
[ 10.914489] init: Unable to open persistent property directory
"/data/property": No such file or directory
[ 10.924177] init: do_start: Service logd not found
[ 10.929011] init: do_start: Service logd-reinit not found
[ 10.938053] init: Starting service 'healthd'...
[ 10.943802] init: cannot find '/system/bin/sh' (No such file or
directory), disabling 'console'
[ 10.947021] binder: 110:110 transaction failed 29189, size 0-0
[ 11.947134] binder: 110:110 transaction failed 29189, size 0-0
[ 12.953154] binder: 110:110 transaction failed 29189, size 0-0
..................
--
--
unsubscribe: android-porting+***@googlegroups.com
website: http://groups.google.com/group/android-porting
---
You received this message because you are subscribed to the Google Groups "android-porting" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-porting+***@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.